Custom

16' welded hog panels that each have two slide in pins (with clip to prevent animal removal) for attaching each section to the next. Each section sits approximately 1" off the ground on two legs with a rounded plate to prevent sinking into the ground. One section typically consist of two 8' sections and serves as the gate for accessing via vehicle if necessary. The minimum required area as recommended by Texas A&M for whitetail accessibility is 6 X 16' panels. we have built smaller and larger. All units are galvanized upon completion.

Interlocking portable 16' hog panels

Fabricated with 11 gauge iron and reinforced with 1/4" flat bar and 2" X 2" 11 gauge square tubing. Bunks are pre drilled upon request and can be attached end to end to meet the customers desired length. Like all our products units are galvanized, fork lift friendly and equipped with weld on D-rings for easy pulling to the next location.

We have on occasion as demand warrants built the following products. These products are not available at all dealers. If interested drop us a line for availability and pricing.

Things we have built when time allows and customers request.

Swift Six Ag Works LLC

Deer blind skids built from Schedule 40 pipe, 1/4" angle iron and 3/4" X #9 expanded metal (porch). We have built skids for 4' X 6' and 6' X 6' blinds. Most of the blinds have been fiberglass, but some custom blinds have been built from wood right onto the skid. All are galvanized and equipped with weld on D-rings for pulling where ever you like.